How to Set the Speed Limiter on Your RIIFT Remote
Left: SP-100% means full power. Right: LMT-80% means the speed limiter is on.
By T.J. Gulizia
Full power on a RIIFT pop-up is a lot. On my first sessions on the 2P, every take-off felt like a hold-on-to-your-horses launch.
The fix is the speed limiter on the RIIFT remote. It isn’t obvious, and you won’t find it in a manual online, so here’s how it works, straight from RIIFT USA.
Watch: Setting the Speed Limiter
Video: John Hallman, RIIFT USA.
It’s a Two-Step Job
Step 1:
Pick your limit in SP-LMT
Open the remote’s menu. You’ll see four items: Pair, SP-LMT, Cruise and Tilt Sensor. Scroll to SP-LMT and long-press to open it. The screen shows your current number and “range_20_99”. Long-press again to start editing, set the number you want (anywhere from 20 to 99), then back out of the menu. Backing out saves it.

The RIIFT remote menu (left) and the SP-LMT setting screen (right).
Step 2:
Turn it on from the home screen
This is the step that trips everyone up, me included. Setting SP-LMT doesn’t do anything on its own. Go back to the home screen and double-tap the power button quickly. The top line changes from SP-100% to LMT-80% (or whatever number you picked). Now a full pull on the trigger tops out at your limit.
Double-tap again to go back to 100%. It’s a toggle, so you can switch between your limit and full power right on the water.
Why Use It?
With the limiter on, I can practice controlled pop-ups instead of maxed-out ones. It’s the best way to learn the timing of a RIIFT take-off, and it’s easier on your body and your gear when things go sideways.
Where to start: for your first sessions, try somewhere around 60 to 75%. Once your pop-ups feel smooth, double-tap up to 100% when you need the extra push, like getting onto a bump or climbing back upwind.
A few other things to know: Cruise is a separate setting, not the speed limit, so leave it alone if you’re trying to cap your top end. Tilt Sensor is RIIFT’s pitch and roll cut-off, which stops the prop if the board flips or rolls too far. And you only pair a remote to a Power Module once. After that it connects on its own when you switch the module on.
RIIFT Speed Limiter FAQ
How do I set the speed limit on a RIIFT remote?
Set your number in the SP-LMT menu (20 to 99), back out to save it, then double-tap the power button quickly on the home screen to turn the limit on.
I changed SP-LMT, but my remote still says SP-100%. Why?
SP-LMT only sets the number. The limit isn’t on until you double-tap the power button on the home screen. When it’s on, the top line reads LMT-xx% instead of SP-100%.
How do I go back to full power?
Double-tap the power button on the home screen again. The top line goes back to SP-100%.
What do SP-100% and LMT mean on the RIIFT remote?
SP-100% means you’re at full power. LMT-xx% means the speed limiter is on and a full trigger pull tops out at that percentage.
What range can I set?
Anywhere from 20 to 99%. The SP-LMT screen shows the range as “range_20_99”.
Is Cruise the same as the speed limiter?
No. Cruise is a separate menu item. Use SP-LMT plus the double-tap to cap your top speed.
What speed limit should a beginner use?
We suggest starting around 60 to 75% for your first sessions and practicing pop-ups there. Turn it up as your take-offs get smoother.
Does this work on the 2P, 3P and 4P?
Yes. Every RIIFT PowerPack comes with the same remote, so the steps are the same whichever Power Module you ride.
New to RIIFT? Read We Rode It: RIIFT Foil Assist and our guide to picking a 2P, 3P or 4P.
Pre-order your RIIFT PowerPack or Power Module today. The first US systems land at Big Winds in mid-January 2027.
T.J. Gulizia is a co-owner of Big Winds in Hood River, Oregon. Come by 207 Front Street or call 541-386-6086.
Get Yours Here!
RIIFT PowerPack
Foil Assist / Prone / Downwind / Flatwater
EXPECTED TO SHIP MID-JANUARY 2027
Available as 2P, 3P, or 4P, the RIIFT Powerpack comes with everything you need to upgrade your RIIFT-enabled board to the world’s most balanced foil assist.
Not sure which size? Read our 2P vs 3P vs 4P guide →
We Rode It: RIIFT Foil Assist, plus 3 tips for RIIFT newbies →
RIIFT Power Module
Foil Assist / Prone / Downwind / Flatwater
EXPECTED TO SHIP MID-JANUARY 2027
RIIFT’s proprietary Power Module is a self-contained, IP68 waterproof, all-in-one battery for the RIIFT Power System.
Not sure which size? Read our 2P vs 3P vs 4P guide →
We Rode It: RIIFT Foil Assist, plus 3 tips for RIIFT newbies →