Tour
The TAO Air-Glide is designed specifically for the paddler who wants a board to take out with the family, surf small to mid-sized waves, take a SUP yoga class, or cruise the shoreline.
Made from the finest Drop Stitch Construction (DSC) and lightweight and durable Support Stringer Technology (SST), these boards are light, stiff, and reliable. They come packaged with a three-piece adjustable paddle so that you are ready to go out of the box.
The 10’6” is a perfect board for surfing, cruising, and yoga while the 11’0” and 12’6” are designed more for recreational fitness and cruising. The 10’6” TAO Air-Glide Wind is a great board to paddle when there is no wind, and when the wind turns on, you can put your sailing rig on the board and cruise under sail power.
KEY FEATURES
The TAO AIR-GLIDE (SST) 11″ x 32″ comes with:
- SST (Single Skin Technology).
- 9.0” weedless fin (nylon).
- Center carry handle.
- Tethering and leash D-rings on nose and tail.
- Bungee tie downs on nose and tail.
- Dual action pump, leash.
- Backpack and repair kit.
- GoPro Action Mount.
- 3 PC Paddle.
CONSTRUCTION
SST – Made from the Finest single skin Drop Stitch material (DSC), this lightweight and durable Support Stringer Technology (SST) is light, stiff reliable. These boards also incorporate a HDPE belt heat fused onto PVC to make a top and bottom stringer for increased stiffness and to lock in the rocker profile.
SPECS
| Length | 11’0″ |
| Width | 32,0″ |
| Thickness | 6” |
| Weight | 22.9 lbs |
| Volume | 320 L |
| Max Rider Weight | 250 lbs |
| Fins setup | Single Fin |
| Center fin | Mahi-Mahi 9″ |
| Fins supplied | 9” Weedless Nylon fin |
| Fin Box Configuration | STANDARD US |
PADDLE
ALL AROUND / FLEET
Shaft:
- 67”/ 86.6”
- Reinforced aluminum shaft w/ sandblasted finish for better grip
T Grip:
- Adjustable handle + pin inox
- Cleat system with groove locator for centering
Blade:
- Durable plastic
- 10 degree blade sweep
Points to be respected to maximize the lifespan of your inflatable Air-Glide Stand-Up-Paddle :
- Do not exceed the maximum recommended inflation pressure.
- Do not use an electric air compressor, it may result in poor performance or damage the board and will automatically void all warranties.
- Deflate the board by at least 1-2 PSI when not in use but exposed to full sun/hot temperatures.
- Re-inflate and check the pressure before returning to the water.
- Check the tightness of the valve regularly, using the tool supplied with the board, and re-tighten when necessary.
- Don’t carry the board on top of your car/vehicle when inflated.
- Rinse your board down regularly with tap water, and especially when putting it away for winter etc., paying particular attention to the valve.
- Avoid rolling your board too tightly when putting it away in its bag after use.
- During winter, keep your board very slightly inflated, store it flat, out of direct sunlight and in temperatures not lower than 0°C.
